Perfect Fit

Here is the final post on the HBA installation which was finished earlier this month. As the project moves from major hardware installation to software and commissioning, reports from Chilbolton will be stopping, so you should expect fewer blog posts in the coming weeks.

Here it is: the last report:

Over the top of each HBA tile, there is a black UV-resistant cover. These are fitted to each tile and held to the ground via elastic rings that connect to the anchor ropes.

A rod is cut into the folded cover edge. An elastic loop is
included.



The elastic loop is knotted to provide the tension and an S-hook is attached.



Richard Whittaker goes around the edge of a cover fitting the loops and S-hooks.